3D_Evolution Whitepapers 

Understanding Validation requirements for Long Term Archiving and Retrieval (LOTAR)

As CAD applications constantly change in a multi CAD environment sharing data is a must. Companies are looking at ISO 10303 STEP for both sharing data as well as maintaining data for Long Term Data Retention (LOTAR). International Organization for Standardization (ISO) standards with STEP has not only set the stage for this multi CAD environment but also created a way to share data for this global requirement. Moreover, the requirements are adding the need for Product Data Quality. The culminations of these standards are allowing companies around the globe to deal with interoperability with less challenge.


CATIA V4 から CATIA V5 への移行

CT コアテクノロジーは自動車/宇宙航空産業との緊密なコラボレーションを通じ、CATIA V4 から最新の CATIA V5 CAD/PLM システムに 3D モデルを移行するための自動プロセスを開発しました。



航空機産業とそのサプライヤーにとって良好な協力関係は、コストを抑える上で必要不可欠な要素です。このホワイトペーパーでは、実際のお客様のケース スタディからさまざまな産業向けのソリューションを紹介します。


Automated Geometry Simplification using 3D_Evolution

Challenge: A large general machinery company wanted to develop an automated process to generate simplified 3D CAD models from existing master models and manage the results in the PLM application. The current manual process was time consuming with inconsistent results. It was difficult to keep the master models synced to the simplified models due to the time models were checked out from the PLM application. In addition, the company wanted to protect its Intellectual Property (IP) by removing the internal guts, thus creating the envelopes only.


CAD と CAE の掛け橋

ユーザーが FEM ツールに求めるメリットの一つは、制約の多い CAD から解放され、信頼性の高い結果をすばやく得ることです。このホワイトペーパーでは、構築と計算の間に存在するギャップを埋めるために、お客様が実際に導入しているさまざまなワークフローを紹介します。